START KIT 3-coat chrome effect à 250g

POLYURETHANE / POLYESTER POWDER COATING

Quality coating powder

Starter KIT for CHROME coating in the 3-layer system

Total weight 750 grams

250 g. ALU antigas. primer

250 g. Chrome effect / chrome silver

250 g. Clear coat transparent

Surface: smooth

Degree of gloss: high gloss

Recommended burn-in condition:

Object temperature 190° C / 20 - 30 min.

Application:

In the multi-layer process, handle the powder coatings as follows:

After the component has been stripped and degreased, e.g. by glass bead or sand blasting, the first coat of paint (primer) is applied and baked in a well preheated oven according to the recommended baking conditions. Remember that the baking time will vary depending on the thickness of your substrate.
After the curing time, allow the component to cool down briefly. When the object has a residual temperature of approx. 70°/80° C, the second layer (chrome silver) is applied and baked again with the recommended burn-in conditions. Do the same with the third layer (clear coat). When baking, please ensure the correct object temperature with the corresponding holding time (ideally using a laser temperature measuring device)

The individual steps must be carried out in one operation in order to ensure cross-linking of the respective layers.

The final hardness of the powder coating is reached approx. 5 - 30 minutes after cooling.

Suitability

all common tribo and corona powder guns and powder coating systems

Application all metals for indoor and outdoor use

Unit of measure:

750 grams = quantity 1